Danish Maritime Engineering Heritage & Global Service
Marco Marine A/S is a trusted Danish maritime engineering, diesel engine overhaul, and marine equipment partner serving global shipowners, offshore operators, and power plants 24/7/365.
Operating from our headquarters and workshop in Fredensborg, Denmark and our Baltic branch in Klaipėda, Lithuania, we combine hands-on diesel engine craftsmanship with certified MARPOL fuel sampling technology and our cloud-based MarcoMarine Service (MMS) maintenance platform.
Marco Marine Engineering Specialists & Leadership
Meet our dedicated marine diesel engineers, workshop technicians, logistics specialists, and leadership across Denmark and Lithuania.
Henrik Nederby
Managing Director / CEO
Fredensborg, Denmark
Casper Staal
Service & Technical Manager
Fredensborg, DenmarkRemigijus Vitauskis
Branch Manager (Lithuania)
Klaipėda, Lithuania
Christian Popp
Service Engineer
Fredensborg, DenmarkPhilip Walseth
Service Engineer
Fredensborg, Denmark
Stephanie Zederkopff
Office
Fredensborg, Denmark
Brian Andersen
Workshop
Fredensborg, DenmarkMathias Lund
Service Engineer
Fredensborg, Denmark
Malthe Jensen
Service Engineer
Fredensborg, Denmark
Jesper Rahr
Service Engineer
Fredensborg, Denmark
Romas Zarinskas
Marine Engineer
Fredensborg, DenmarkQHSE & Corporate Social Responsibility (CSR)
Marco Marine A/S operates under a documented Quality, Health, Safety, and Environmental (QHSE) Management System (Business Manual 4.0) aligned with ISO 9001, ISO 14001, and ISO 45001 standards.
At Marco Marine A/S, Quality, Health, Safety, and Environmental (QHSE) excellence forms the cornerstone of every workshop rebuild, riding squad mobilization, and offshore attendance. Certified under ISO 9001 (Quality), ISO 14001 (Environmental), and ISO 45001 (Occupational Health & Safety), our procedures ensure consistent precision, full traceability, and zero-harm working conditions across all maritime jurisdictions.
Our environmental strategy focuses on practical lifecycle management—extending the operational lifespan of heavy diesel components through high-precision reconditioning, utilizing solvent-free ultrasonic aqueous cleaning to eliminate aggressive chemicals, and delivering MARPOL Annex VI type-approved fuel sampling solutions that safeguard marine ecosystems and ensure worldwide emissions compliance.
Marco Marine upholds the highest standards of corporate governance, human rights, and business ethics. We maintain strict zero-tolerance policies toward bribery, corruption, and workplace substance abuse, alongside rigorous equal-opportunity practices and strict GDPR-compliant data stewardship for all customer vessel documentation and overhaul records.
Lifecycle Extension & Compliance
Extending diesel engine component service life, utilizing solvent-free ultrasonic cleaning, and ensuring worldwide MARPOL fuel compliance.
Standard Terms & Conditions
General terms and conditions for delivery of marine diesel engine assistance, workshop reconditioning, technical personnel, and marine equipment.
Normal working week is 7 days; normal working day is 11 hours. Additional hours billed at overtime rates.
Daily hours tracked and countersigned by the Buyer's Chief Engineer or authorized representative.
Invoices payable within 15 days of invoice date. Goods remain property of MM until paid in full.
Governed by Danish Law and finally settled by the Danish Institute of Arbitration in Copenhagen.
§1
Scope and Application
1.1 An order for assistance by service personnel from Marco Marine (hereinafter referred to as MM) in whatever form the order is given, presupposes acceptance by the Buyer of these Terms and Conditions from us. They remain valid until otherwise notified to the Buyer in writing.
1.2 Price lists applicable in case work is carried out according to invoice and other special terms will be enclosed and form an integral part of these Terms and Conditions.
§2
Working Hours and Supervision
2.1 A normal working week comprises 7 working days. A normal working day comprises 11 working hours. For additional hours, an overtime rate will be charged.
2.2 The Buyer or his authorized representative is requested to follow the progress of the work closely.
2.3 Time sheets detailing the hours worked by the MM repair team must be filled out daily and countersigned by the Buyer's Chief Engineer or authorized representative. If the Buyer's representative refuses to countersign or disagrees with a timesheet, he must immediately notify Marco Marine in writing via email. Objections to invoices based on debited time become null and void if a timesheet has been countersigned or if the Buyer fails to provide prompt written notice of objection.
2.4 Effective working time is defined as the time from when the repair team commences work until they leave the work site, less meal breaks. Local transit and transport are invoiced at normal hourly rates.
2.5 If personnel do not stay on board the vessel, working time starts when staff leave their living quarters and ends upon return, with transit time invoiced as travelling time.
§3
Waiting Time
3.1 Waiting time caused by lack of work or a reduced number of working hours due to circumstances beyond the control of the MM team will be invoiced at the normal working hour rate. However, the team may undertake alternative duties if agreed in order to minimize waiting time.
3.2 When personnel must wait for a vessel's arrival, waiting time is charged daily between 08:00 and 20:00 hours.
3.3 Invoicing for waiting time is capped at a maximum of 11 hours per day.
§4
Travelling and Transport Expenses
4.1 Travelling and transport expenses are invoiced at actual net cost plus a 10% administrative overhead charge.
4.2 Travelling time is billed at normal working hour rates, up to a maximum of 11 hours per calendar day.
§5
Hotel, Allowances and Incidentals
5.1 Hotel accommodation and daily subsistence allowances are invoiced at actual cost plus a 10% administrative charge.
5.2 Free board and lodging provided to the MM service team on board or ashore must be of a good, reasonable marine standard.
5.3 Other necessary operational out-of-pocket expenses incurred during attendance (communications, port transport, specialized test equipment shipping) are invoiced at cost plus 10%.
§6
Accommodations and On-Board Facilities
6.1 Living quarters and accommodations provided on board must be clean, safe, and of a reasonable marine standard.
6.2 Access to sanitary facilities including a bath/shower with continuous hot and cold running water must be available.
6.3 Where possible, a separate duty mess with refrigerator access should be placed at the disposal of the repair team.
6.4 The service team must be provided with reasonable opportunities to purchase beverages and personal necessities during their stay on board.
6.5 Additional necessary expenses incurred for team assistance will be invoiced at cost plus 10%.
§7
Invoicing, Payment Terms and Retention of Title
7.1 Invoices for service assistance and parts are issued promptly upon completion of the work alongside the technical service report. Invoices must be paid by the Buyer within 15 days of the invoice date.
7.2 Any dispute regarding an agreement or an invoice does not entitle the Buyer to withhold payment wholly or partly or fail to pay an invoice on or before its due date. Late payments accrue interest from the due date until full payment is received at standard commercial rates.
7.3 Retention of Title: All delivered spare parts, equipment, reconditioned components, and materials remain the absolute property of Marco Marine A/S until payment has been made in full.
§8
Permits, Licenses and Certifications
8.1 It is the sole responsibility of the Buyer to advise, arrange, and where required obtain and maintain all necessary permissions, permits, licenses, visas, port passes, or certificates from relevant authorities, shipyards, or classification societies concerning the work performed by MM.
§9
Tools, Rental Equipment and Work Site Facilities
9.1 If requested, MM supplies specialized overhaul tooling, hydraulic pumps, honing machines, and calibration instruments under separate agreement.
9.2 Rental charges for equipment apply from the date tools depart MM facilities until they are safely received back at MM premises.
9.3 Tools must be repacked into toolboxes immediately following overhaul completion under the supervision of the Buyer's representative, inspected for shortages, securely locked, and stored protected from dust, humidity, and weather. Missing or damaged tools will be charged to the Buyer.
9.4 Work Site Facilities: Unless otherwise agreed, the Buyer must provide at their own expense: transport of materials to and from the work site, scaffolding, overhead craneage, blocks and wire tackles, electric power, dry compressed air, suitable lighting, fuel, and clean fresh water.
§10
Force Majeure, Delays and Liquidated Damages
10.1 Force Majeure: Marco Marine shall not be held liable for failure or delay in performance caused by circumstances beyond reasonable control, including acts of God, war, strikes, lock-outs, fire, severe weather conditions, port lockouts, or major international freight disruptions.
10.2 Delays Caused by Buyer: If MM is delayed due to causes attributable in whole or in part to the Buyer, vessel operations, or agents, MM is entitled to a corresponding extension of time and reimbursement of resulting extra costs.
10.3 Liquidated Damages: If MM is delayed for reasons other than force majeure or buyer delay, the Buyer is entitled to liquidated damages equal to 2% of the purchase price per full week of delay, capped at a maximum of 10%. This constitutes the Buyer's sole and exclusive remedy for delay (except in cases of gross negligence or willful misconduct).
§11
Quality of Workmanship, Conformity and Defect Notification
11.1 All service work is executed in accordance with skilled maritime engineering practices and Marco Marine's certified ISO 9001 quality management system. The Buyer's technical staff must inspect the overhaul and verify engine safety prior to startup and sea trial.
11.2 Notice of Defects: The Buyer must give written notice of any alleged defect or lack of conformity within reasonable time after discovery. A hard cutoff deadline of two (2) years applies from the date of work completion or delivery.
11.3 Remedies: Where a defect is proven and timely reported, MM will at its sole discretion repair or replace the defective part or re-execute the service within reasonable time at its own expense. However, travel, waiting, and accommodation costs for service personnel attending to rectification remain for the Buyer's account.
§12
Limitation of Liability and Exclusion of Indirect Losses
12.1 Financial Cap: Marco Marine's total aggregate liability for property damage or physical damage arising out of any attendance or delivery is strictly capped at a maximum of DKK 1,000,000 per damage occurrence, and DKK 2,000,000 per calendar year.
12.2 Exclusion of Consequential Loss: Marco Marine shall in no event be liable for any indirect, incidental, or consequential losses, including but not limited to loss of hire, loss of production, loss of profits, commercial operational downtime, towage, or detention.
12.3 Indemnification: The Buyer agrees to defend, indemnify, and hold MM harmless from third-party claims exceeding the liability limits agreed herein.
§13
Insurance and Builders Risk (CAR) Coverage
13.1 Marco Marine maintains standard Danish commercial general and product liability insurance policies, copies of which are available upon request.
13.2 Where the Buyer carries Builders Risk or Contractors All Risks (CAR) insurance, Marco Marine and its subcontractors shall be named as additional insureds with full waiver of subrogation against MM.
§14
Additional Assignments and Overtime Authorization
14.1 Additional Work: Following conclusion of the primary scope, the MM repair team may undertake additional tasks if agreed and recorded on daily time sheets under the Chief Engineer's direction.
14.2 On-board charges (e.g., duty store purchases) should be settled directly before the service team departs the vessel.
14.3 Working days exceeding 11 hours require prior consultation and explicit written sign-off from the vessel's Chief Engineer or superintendent.
§15
Governing Law and Arbitration
15.1 Any dispute, controversy, or claim arising out of or in connection with any contract, quotation, delivery, or service performed by Marco Marine A/S shall be governed by and construed in accordance with the substantive laws of Denmark.
15.2 Any dispute shall be finally settled by arbitration administered by the Danish Institute of Arbitration (Danish Arbitration) in Copenhagen in accordance with its simplified rules of procedure.
Frequently Asked Questions
Quick answers regarding MARPOL Annex VI fuel sampler compliance, offshore riding team certifications, and OEM spare parts.
Are Marco Marine FS5051 Fuel Samplers compliant with the latest IMO MARPOL Annex VI regulations?
Yes. Both the FS5051 and FS5051 Mobile pneumatic drip samplers are fully compliant with IMO MARPOL Annex VI (Resolutions MEPC.182(59) and MEPC.96(47)), hold DNV Type Approval Certificate TAP00000ZX, and are ATEX certified (DTI 23ATEX0314X, II 2G Ex h IIB T6 Gb) for hazardous bunker zones.
Can we use one FS5051 Mobile sampler across multiple bunker lines on the same vessel?
Yes. By installing stainless steel flange probes and Back Plates (BMP50) at each bunker manifold, a single FS5051 Mobile unit can be moved and locked onto the active bunker line in seconds using quick-release couplings.
How fast can Marco Marine mobilize an emergency riding team or offshore service engineer?
Our 24/7 emergency dispatch team (+45 2284 5860) can mobilize diesel engineers from our hubs in Denmark and Lithuania within 24 hours worldwide. Our offshore team maintains active OPITO BOSIET, MIST, OGUK medicals, and US C1/D, B1/B2 & Brazil visas.
Are you an authorized agent for Daihatsu Infinearth engines?
Yes, Marco Marine A/S is an official agent for Daihatsu Infinearth (formerly Daihatsu Diesel Mfg. Co., Ltd.) in Denmark, supplying genuine OEM spare parts, DF dual-fuel engines, and factory-certified service.
What size Marco Pool Ultrasonic Cleaner do we need for cylinder heads and coolers?
We offer four heavy-duty 28 kHz models: 2750 HL (76 L) for fuel injectors and small valves, 3050 HL (165 L) and 3250 HL (208 L) for auxiliary engine cylinder covers and filter elements, and 8050 HL (383 L, 1100 mm length) for large cylinder heads and heat exchangers.
How do customers access overhaul measurement reports and fleet history?
All overhaul logs, component measurements (bearings, liners, pistons, crank deflections), and technical reports are accessible 24/7 through our online MarcoMarine Service (MMS) portal.
What does diesel engine service include?
Marco Marine's diesel engine service provides comprehensive maintenance and overhaul solutions for 2-stroke and 4-stroke marine engines and auxiliary generator sets. Our scope includes complete dismantling and reconditioning of cylinder heads/covers, pistons, connecting rods, cylinder liners (including honing and wear calibration), camshafts, and main/crankpin bearings. We also carry out bench testing and calibration of fuel injection pumps and injectors, heavy-duty 28 kHz ultrasonic cleaning of charge air coolers and heat exchangers, in-situ machining, and full digital overhaul documentation accessible via our MMS portal.
How often should marine diesel engines be serviced?
Service intervals follow engine manufacturer (OEM) running-hour recommendations, class society requirements, and fuel operating conditions. Routine maintenance (such as testing fuel valves, injectors, and filters) typically occurs every 1,500 to 3,000 running hours. Intermediate inspections (cylinder cover overhauls and valve seat grinding) take place around 6,000 to 10,000 hours, while major overhauls (piston pulling, liner honing/replacement, and bearing renewal) are conducted every 12,000 to 24,000 hours. Through precision condition monitoring, lube oil analysis, and genuine OEM parts, Marco Marine also helps operators safely achieve Class-approved Overhaul Interval Extensions (OIE).
Do you provide on-site diesel engine service?
Yes, absolutely. Marco Marine provides 24/7 global on-site service wherever your vessel is located. Our rapid-deployment riding teams and superintendents attend vessels in port, at anchorage, or during commercial voyages with zero disruption to sailing schedules. For offshore installations, our OPITO BOSIET-certified engineers mobilize worldwide to FPSOs, platforms, and wind farm vessels. Additionally, we deploy mobile containerized Satellite Workshops directly to any shipyard or quay, equipped with specialized honing, grinding, and calibration tools requiring only local air and electrical power.